 |
|
|
- Hull = Solid laminate using vinylester resin in external layers and fitted with internal FRP grid
- House & deck = FRP laminated with structural coring as required
- Non-skid decks (teak optional)
- Propulsion engines = (Twin) 220 Hp. Cummins Diesels, model 6BT5.9m. (Larger engines optional)
- Fuel lines-flexible hose U.S.COAST GUARD approved
- Racor fuel filters
- 8 KW diesel genset
- Molded FRP airfoil rudders with stainless steel stocks and cores
- Two station hydraulic steering
- Two station hydraulic engine/transmission controls
- Fuel tanks = molded FRP with gelcoated interior, total 1000 U.S gallons
- Water tank = molded FRP with gelcoated interior; total 1000 U.S. gallons
- Foam/lead sandwich engine room insulation
- Aluminum cabin sole beams
- Fabricated steel engine mount saddles
- Electric toilets in master and guest washrooms
- Two 20 gal. toilet holding tanks with both deck pump-out & gravity drain
- Pressurized water system with 12 U.S. gallons water heater
- Two electric bilge pumps with automatic float switches
- Watertight engine room bulkheads
- Manual bilge pump
- Automatic 12 volt shower sump pumps
- International navigation lights
|
|
|
|
|
- Three (3) 12 volt pantograph windshield wipers
- Electric air horn
- Shore power Inlet = 50 Amp rating
- Main circuit breaker panel with volt & ammeters for 12V D.C. and 120V A.C.
- Batteries = 6 each heavy duty 12 Volt 200 amp hours with selector switch
- Opening screened ports in staterooms and washrooms
- Aluminum sliding windows in pilothouse and saloon
- Aluminum frame fixed windows in pilothouse
- Vinyl upholstery on pilothouse seats
- Berth mattresses fabric covered
- Carpets, excepting in galley & pilothouse where cabin sole is teak & holly
- Norcold or equal AC/DC refrigerator 2-door w/freezer
- Electric cook top range, 3 burners
- Microwave oven
- Interior teak varnished with gloss finish
- Port and starboard bulwark doors
- Type 316 stainless steel deck hardware as listed:
- Bow pulpit and double rails of 1-1/4” diam. tube.
- Mooring chocks at Bow, midships & stern.
- Boatdeck double rails of 1-1/4” diam. tube.
- Boatdeck/cockpit ladder.
- Flagpole socket (with teak flagpole)
- Bow mooring bitt
- Bow anchor roller assembly
- Emergency tiller access plate
- Shipping cradle & shipping cover
|
|
